Meet Growver, the lawn-watering hero your grass has been waiting for. Growver is a robot that attaches to your garden hose. Using its wire sensing technology, Growver intelligently navigates and irrigates your lawn. Water sensors in the robot detect which areas of your yard are dry so Growver can revive them. And with the connected app, you can track how your lawn is doing over time, adjust water levels, and even control Growver remotely.
How Growver Save Water
The only way to distribute water efficiently and evenly is to place it directly where it’s needed. That’s what Growver does – by driving back and forth on the lawn and watering a 20-inch (500mm) wide path. First Growver’s sensors guide it along the boundary wire. After watering the perimeter, Growver fills in the entire area using patent-pending sensor technology to follow the wet-dry transition. Measurements from grass moisture sensors and water-flow data let Growver intelligently adjust watering depth. Growver stops automatically when the entire area is watered.
The entire process completes without wasting a drop of water on the pavement. Irregular areas like this are a real problem for sprinklers!
There are 3 ways to use Growver:
- Fill Mode is the normal operating mode. Growver irrigates along and then inside an area defined by the perimeter wire.
- Outline Mode has Growver following the wire until a very sharp (90 degree or less) bend which marks the end of the irrigation run. This mode is useful for long, narrow areas.
- Remote Mode allows manual Growver operation from a mobile device via Bluetooth. Just sit back and drive Growver around while enjoying your favorite cold drink. No perimeter wire is required. You can even lay out a wet perimeter using remote control, then let Growver automatically fill it in.
0 comments:
Post a Comment